OK sports fans...I got my fax on this info yesterday and had actually
forgotten about my post on this info...that is until I came to the NG
and that nice little yawn boy..sisteruzi or whatever his freakazoid name
is today..he posted it again just so I would remember to list the info
for all of you...wasn't that nice of him???...so everyone remember to
thank twisted yawn boy for reminding me...otherwise this classified
information may never have been posted on the NG...LOL!!!

Manufacturer:.Lefebure/DeLa Rue

model#:.benchmark series 50c

handle type: T handle

handle location:.3 1/2 " left of dial center,1/2" down.

handle rotation:.clockwise

dial center to handle center:.3-1/2"

number of door locking bolts:. 4

location of door locking bolts: 4"--15"--26"--37", down from top of
door.

door thichness to bolt center:. 3"

door thickness to lockcase:. 2-1/4 "

door thickness to back o ock: 3-1/2"

lock type: lagard 1854RL holdup lock with key locking dial

lock description: 3 wheel, key change lock with a silent alarm feature,
theree is a micro switch at the top of the lock.

lock case thickness: 1-1/8"

driver location: rear driven

lock position:  mounted VD(vertical Down)

forbidden zone: 0-20

lock opening procedure: 4xL to first number(adten numbers to this number
for silent alarm feature),3xR to second number,2xL to third number and
1xR till dial stops.

notes on lock: there is an additional gate on the first wheel. when you
add 10 numbers to the combination,the lever will still drop in, but in
this position it will activate a microswitch that wil avtivate a silent
alarm when the bolt is retracted!

drill point for drop: 7/8 " ut thru the number 72..drill here and read
gates to fence.

lockcase has its own wire spring relock device in case the back case of
the lock is removed or punched off. the drill point for this relock
trigger is 7/8 " right of dial center and then measure 1-5/8" down, hook
the wire and pull back towards you.

there is also a relock device for the locking bolts themselves which is
a spring loaded plunger..drill point for this is 1-5/8" left of dial
center and 2-3/4 inches down..

Hope this helps out some of you budding safe men...as well as the few
real locksmiths who aren't complete assholes in here...you know who you
are.....

am also looking at another machine...but have to get the model number
before I can get any info on this one....maybe sister"yawnboy"uzi will
remind me to get that info and post it also...we are so lucky to have
such a considerate little dink around here to remind me to post
things...and also..I JUST LOVE THE way everytime he tries to flame
me(which has yet to happen..LOL)...I just love the way he e-posts my
entire posting...lets all you guys who missed it the first time get a
chance to read it when he posts it for me...what a thoughtfull little
dink aint he???LMFAO...keep up the good work yawn boy and maybe billybob
bonehead will promote you from kissing ass to licking his balls!!!

ciao to all...

Freddie The Wire